Clutch & Transmission Tools


 

CLUTCH COMPRESSOR TOOL-LI/J

US$58.92 US$55.98

Compresses the clutch springs to allow removal of clutch plates for all Series 1, 2 and 3 models (except TV175 Series 1). On Li models it bolts to 4 of the side case studs. If you have a J model, center the threaded post over the clutch and drill alternate holes in the tool to align with at least two of the side case studs (one on the top and one on the bottom of the engine case).

CLUTCH COMPRESSOR TOOL-D/LD

US$24.84 US$23.60

Compresses the clutch springs to allow removal of clutch plates for all LD and D models

SPRING HOLDER-LI

US$13.80 US$13.12

Holds the clutch springs in place while installing the clutch plates in all Series 1, 2 and 3 models (except TV175 Series 1)

Holds the inner clutch basket to allow removal of the center clutch nut in all Series 1, 2 and 3 models (except TV175 Series 1). Necessary when dismantling the clutch baskets or transmission.

INNER CLUTCH HUB HOLDER-D/LD

US$13.80 US$13.12

Holds the inner clutch hub to allow removal of the transmission primary shaft center nut in all LD and D engines. Necessary when dismantling the clutch baskets or transmission.

ViseGrip style design; has round pegs to fit in sight holes of flywheels, angled jaws to grab clutch baskets, etc. An extremely useful tool for any Lambretta owner!

 

CLUTCH COMPRESSOR TOOL-LI/J

US$58.92 US$55.98

Compresses the clutch springs to allow removal of clutch plates for all Series 1, 2 and 3 models (except TV175 Series 1). On Li models it bolts to 4 of the side case studs. If you have a J model, center the threaded post over the clutch and drill alternate holes in the tool to align with at least two of the side case studs (one on the top and one on the bottom of the engine case).

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 Item(s)
US$0.00